??1.Static safety workbench a.Static safety workbench is the basic component of the anti-static work area.It consists of a workbench,an anti-static table mat,a wristband joint and a grounding wire.b.There should be no less than two wristband connectors on the anti-static table mat,one for the operator and the other for the technician,the inspector or other personnel.c.If necessary,the electrostatic safety workbench should be equipped with an ion wind static eliminator.d.It is not allowed to stack plastic boxes(sheets),rubber,cardboard,glass and other debris that are easy to generate static electricity on the static safety workbench.The drawings and materials should be placed in the anti-static paper bag.
??2,anti-static wristbands directly contact with electrostatic sensitive devices should wear anti-static wristbands,wristbands should have good contact with human skin,wristbands must be no stimulation to the human body,no allergic effects,wristband system resistance to ground It should be in the range of 106 to 108Ω.
??3.Anti-static container In the process of development and production of electronic equipment,all storage and turnover SSD containers(component bags,transfer boxes,printed boards,component storage boxes,etc.)should have electrostatic protection performance.Metal and ordinary plastic containers are not allowed.If necessary,the tote box for the storage unit should be grounded.
??4.The ion wind static eliminator should eliminate the static charge on the surface of the insulating material by using an ion wind static eliminator.
??5,anti-static overalls a,enter the anti-static work area or contact SSD personnel should wear anti-static overalls,anti-static overalls fabrics should comply with the provisions of GB 12014.b.In an environment with a relative humidity greater than 50%,the anti-static overalls are allowed to use pure cotton products.
??6,anti-static work shoes into the anti-static work area or contact SSD personnel should wear anti-static work shoes,anti-static work shoes should comply with the relevant provisions of GB 4385.Normal shoes are generally allowed,but a conductive shoe bundle or heel strap should be used at the same time.
??7.When the anti-static transport vehicle transports SSD or the whole parts containing SSD,the transport vehicle with anti-static performance should be used.